Xorg.0.log - SanDisk SSD U100 - ARMv7 rev 10

Return To SanDisk SSD U100 - ARMv7 rev 10 System Information

X.Org X Server 1.11.3
Release Date: 2011-12-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.42-51-highbank armv7l Ubuntu
Current Operating System: Linux utilite-desktop 3.0.35-cm-fx6-5.1 #232 SMP Wed Dec 11 10:51:48 IST 2013 armv7l
Kernel command line: console=ttymxc3,115200 root=/dev/sda2 rw rootwait
Build Date: 16 October 2013  04:40:01PM
xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see ) 
Current version of pixman: 0.30.2
	Before reporting problems, check 
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 21 02:39:32 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "i.MX Accelerated Framebuffer Device"
(**) Option "IgnoreABI" "true"
(**) Ignoring ABI Version
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
(==) ModulePath set to "/usr/lib/arm-linux-gnueabi/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x40233d00
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 11.0
	X.Org XInput driver : 16.0
	X.Org Server Extension : 6.0
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 6.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 6.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 6.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 0.0.0.10, module version = 1.0.0
	ABI class: X.Org Server Extension, version 5.0
(WW) module ABI major version (5) doesn't match the server's version (6)
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.2.0
	ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DRI2
(II) LoadModule: "vivante"
(II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
(II) Module vivante: vendor="X.Org Foundation"
	compiled for 1.10.4, module version = 1.0.0
	ABI class: X.Org Video Driver, version 10.0
(WW) module ABI major version (10) doesn't match the server's version (11)
(II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
	VivanteGCCORE
(++) using VT number 7

(WW) Falling back to old probe method for vivante
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 0.0.2
	ABI class: X.Org Video Driver, version 11.0
(II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) VIVANTE(0): using default device
(**) VIVANTE(0): Depth 16, (--) framebuffer bpp 16
(==) VIVANTE(0): RGB weight 565
(==) VIVANTE(0): Default visual is TrueColor
(==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VIVANTE(0): hardware: DISP3 BG - DI1 (video memory: 8100kB)
(II) VIVANTE(0): checking modes against framebuffer device...
(II) VIVANTE(0): 	mode "D:1920x1080p-60" ok
(II) VIVANTE(0): 	mode "S:1152x864p-75" ok
(II) VIVANTE(0): 	mode "S:1280x1024p-60" ok
(II) VIVANTE(0): 	mode "S:1280x720p-50" ok
(II) VIVANTE(0): 	mode "S:1280x720p-60" ok
(II) VIVANTE(0): 	mode "S:1920x1080p-50" ok
(II) VIVANTE(0): 	mode "S:1920x1080p-60" ok
(II) VIVANTE(0): 	mode "S:640x480p-60" ok
(II) VIVANTE(0): 	mode "S:720x480p-60" ok
(II) VIVANTE(0): 	mode "S:720x576p-50" ok
(II) VIVANTE(0): 	mode "U:720x400p-70" ok
(II) VIVANTE(0): 	mode "V:1024x768p-60" ok
(II) VIVANTE(0): 	mode "V:1024x768p-75" ok
(II) VIVANTE(0): 	mode "V:1280x1024p-75" ok
(II) VIVANTE(0): 	mode "V:640x480p-60" ok
(II) VIVANTE(0): 	mode "V:640x480p-75" ok
(II) VIVANTE(0): 	mode "V:800x600p-60" ok
(II) VIVANTE(0): 	mode "V:800x600p-75" ok
(II) VIVANTE(0): checking modes against monitor...
(--) VIVANTE(0): Virtual size is 1920x1080 (pitch 1920)
(**) VIVANTE(0):  Mode "D:1920x1080p-60": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "D:1920x1080p-60"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(**) VIVANTE(0):  Mode "S:1152x864p-75": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) VIVANTE(0): Modeline "S:1152x864p-75"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) VIVANTE(0):  Mode "S:1280x1024p-60": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "S:1280x1024p-60"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) VIVANTE(0):  Mode "S:1280x720p-50": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
(II) VIVANTE(0): Modeline "S:1280x720p-50"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
(**) VIVANTE(0):  Mode "S:1280x720p-60": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "S:1280x720p-60"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz)
(**) VIVANTE(0):  Mode "S:1920x1080p-50": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
(II) VIVANTE(0): Modeline "S:1920x1080p-50"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
(**) VIVANTE(0):  Mode "S:1920x1080p-60": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "S:1920x1080p-60"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(**) VIVANTE(0):  Mode "S:640x480p-60": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) VIVANTE(0): Modeline "S:640x480p-60"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) VIVANTE(0):  Mode "S:720x480p-60": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) VIVANTE(0): Modeline "S:720x480p-60"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz)
(**) VIVANTE(0):  Mode "S:720x576p-50": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
(II) VIVANTE(0): Modeline "S:720x576p-50"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
(**) VIVANTE(0):  Mode "U:720x400p-70": 26.2 MHz (scaled from 0.0 MHz), 29.2 kHz, 70.0 Hz
(II) VIVANTE(0): Modeline "U:720x400p-70"x0.0   26.17  720 737 808 896  400 401 404 417 -hsync -vsync (29.2 kHz)
(**) VIVANTE(0):  Mode "V:1024x768p-60": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "V:1024x768p-60"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) VIVANTE(0):  Mode "V:1024x768p-75": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) VIVANTE(0): Modeline "V:1024x768p-75"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) VIVANTE(0):  Mode "V:1280x1024p-75": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) VIVANTE(0): Modeline "V:1280x1024p-75"x0.0  135.01  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) VIVANTE(0):  Mode "V:640x480p-60": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) VIVANTE(0): Modeline "V:640x480p-60"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) VIVANTE(0):  Mode "V:640x480p-75": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) VIVANTE(0): Modeline "V:640x480p-75"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) VIVANTE(0):  Mode "V:800x600p-60": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) VIVANTE(0): Modeline "V:800x600p-60"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) VIVANTE(0):  Mode "V:800x600p-75": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) VIVANTE(0): Modeline "V:800x600p-75"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(==) VIVANTE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 2.5.0
	ABI class: X.Org Video Driver, version 11.0
(II) VIVANTE(0): FB Start = 0x448a3000  FB Base = 0x448a3000  FB Offset = (nil)
(II) VIVANTE(0): test Initializing EXA
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(==) VIVANTE(0): Backing store disabled
(==) VIVANTE(0): DPMS enabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID platform:Vivante GCCore
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore
(II) [drm] loaded kernel module for "vivante" driver.
(II) [drm] DRM interface version 1.4
(II) [drm] DRM open master succeeded.
(II) VIVANTE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) VIVANTE(0): [drm] framebuffer handle = 0x18800000
(II) VIVANTE(0): [drm] added 1 reserved context for kernel
(II) VIVANTE(0): X context handle = 0x1
(II) VIVANTE(0): [drm] installed DRM signal handler
(II) VIVANTE(0): [DRI] installation complete
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID platform:Vivante GCCore
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: Interface 1.4 failed, trying 1.1
drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore
(EE) AIGLX error: dlopen of /usr/lib/arm-linux-gnueabi/dri/vivante_dri.so failed (/usr/lib/arm-linux-gnueabi/dri/vivante_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/event1)
(**) ADS7846 Touchscreen: Applying InputClass "evdev touchscreen catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.11.3, module version = 2.7.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 16.0
(II) Using input driver 'evdev' for 'ADS7846 Touchscreen'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) ADS7846 Touchscreen: always reports core events
(**) evdev: ADS7846 Touchscreen: Device: "/dev/input/event1"
(--) evdev: ADS7846 Touchscreen: Vendor 0 Product 0
(--) evdev: ADS7846 Touchscreen: Found absolute axes
(--) evdev: ADS7846 Touchscreen: Found x and y absolute axes
(--) evdev: ADS7846 Touchscreen: Found absolute touchscreen
(II) evdev: ADS7846 Touchscreen: Configuring as touchscreen
(**) evdev: ADS7846 Touchscreen: YAxisMapping: buttons 4 and 5
(**) evdev: ADS7846 Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/platform/imx6q-ecspi.0/spi_master/spi0/spi0.1/input/input1/event1"
(II) XINPUT: Adding extended input device "ADS7846 Touchscreen" (type: TOUCHSCREEN, id 6)
(II) evdev: ADS7846 Touchscreen: initialized for absolute axes.
(**) ADS7846 Touchscreen: (accel) keeping acceleration scheme 1
(**) ADS7846 Touchscreen: (accel) acceleration profile 0
(**) ADS7846 Touchscreen: (accel) acceleration factor: 2.000
(**) ADS7846 Touchscreen: (accel) acceleration threshold: 4
(II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device snvs_power_key (/dev/input/event0)
(**) snvs_power_key: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'snvs_power_key'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) snvs_power_key: always reports core events
(**) evdev: snvs_power_key: Device: "/dev/input/event0"
(--) evdev: snvs_power_key: Vendor 0 Product 0
(--) evdev: snvs_power_key: Found keys
(II) evdev: snvs_power_key: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
(II) XINPUT: Adding extended input device "snvs_power_key" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"

Return To SanDisk SSD U100 - ARMv7 rev 10 System Information